Intel ReportsUpdated 18 Nov 20263 min read

Warehouse Rentals in Bangkok, Samut Prakan and Chonburi: How to Compare Sites

Compare three warehouse locations using actual delivery routes, truck access, building specifications and the full cost of operating from each site.

Warehouse Rentals in Bangkok, Samut Prakan and Chonburi: How to Compare Sites

Key takeaways

  • Start with your delivery and collection routes, then test access at the gate and dock. Verify building specifications and intended use in writing, and compare the total monthly cost after fit-out and transport.

A cheaper warehouse can become the expensive choice if a truck loses time at the gate every morning. Start with a normal dispatch day. Mark where the first truck loads, the stops it must make and the latest time it can return. Then test whether each site can support that day before comparing its rent.

Give the agent a brief they can screen against

List your move date, budget, usable floor area and work to be done at the site. Specify your largest vehicle, typical delivery windows, storage height, floor load and any power or ventilation requirements. Include the volume you expect on a busy day as well as your usual volume. Ask for drawings or written specifications so you can compare the same measurements at each property.

Ask the agent to shortlist sites in each location that meet the brief and explain the trade-offs. Confirm the exact unit, proposed lease start, and viewing access before booking a trip.

Test the routes that matter to your operation

For a Bangkok site, plot the route to your regular city customers. Check the last approach, delivery windows, where vehicles can wait, and whether the route still works at the hour you dispatch. For a Samut Prakan site, compare the actual route to your most important customer or transfer point. If air cargo matters, test the gate-to-terminal leg with the carrier. For a Chonburi site, compare the run to any regular port, supplier or customer stop. The Industrial Estate Authority of Thailand’s Laem Chabang estate page gives logistics and utilities context for that estate. Ask the operator which entry and booking procedures apply to the specific property.

For example, a distributor with morning city drops and an occasional port collection may get more value from testing the daily city route than from comparing port proximity alone. A business with frequent port collections should put that recurring trip near the top of the comparison. Use the routes your trucks will actually drive.

Check the building from the truck gate to the storage area

During the viewing, check how a vehicle approaches, turns and reaches the dock. Ask where it can queue without blocking the drive. Note door dimensions and clear storage height, including obstructions. Ask for written floor-load and power specifications and confirm them with a qualified specialist before relying on them for racking or machinery.

Tell the owner exactly what you intend to do in the building, including storage, packing, processing or any change of use. Ask which permissions, fit-out approvals and estate rules apply. The Department of Industrial Works factory services page is a starting point for finding the relevant factory services. Confirm the requirements for your operation and site with the relevant authority or adviser before committing.

Compare monthly costs and agree what you get at handover

Put base rent, service charges, utilities, equipment or fit-out costs and the transport cost of a typical month on one sheet. Record the deposit and upfront work separately so you can see how much cash is needed to move in. Ask who pays for repairs, reinstatement, and any changes you need before the first dispatch.

Confirm negotiated terms and the move-in date in writing. At handover, log the condition of the dock, doors and floors, along with meter readings, access devices and promised repairs. Agree who handles a fault, how to raise an urgent problem and when to review the arrangement before renewal.

Take the same questions to every viewing

Keep a separate record for each unit you see. The ThaiProps warehouse and factory viewing checklist covers the next set of checks once you have a shortlist. Give your carrier or operations lead the proposed routes and loading details while there is time to test them.

What to record for each warehouse

DecisionEvidence to record
Route and scheduleMain destinations, dispatch and collection windows, and route notes from your test trip.
Gate and loadingVehicle size, turning and queue space, door dimensions, dock arrangement and written access terms.
Building and useVerified dimensions, floor and power specifications, proposed activities and approvals to confirm.
Lease and handoverTotal monthly cost, upfront cash, written repair and fit-out terms, and a handover contact.
FAQ

Common questions

Which location is best for warehouse rent?

Compare the sites against your own deliveries and collections. Weight frequent routes, truck access and the cost of running each building before deciding.

Can I compare warehouses by rent per square metre alone?

Use the same measure of usable area, then add service charges, fit-out and transport. A lower headline rate can still produce a higher total cost.

How can I tell whether a warehouse can support processing or machinery?

Give the owner your intended activity and equipment requirements. Confirm permitted use, applicable approvals, floor loads and power capacity before signing.

Prepare your warehouse viewing

Take your operating brief and route notes to the next shortlisted site.

Open the warehouse viewing checklist